The ranges below are typical installed prices across Metro Vancouver, compiled from published contractor and cost-guide sources. They are market ranges for the region — not a quote for your floor.
Epoxy Flooring Cost by Project Type
Typical Greater Vancouver market ranges: solid-colour epoxy $6–$10/sq ft, decorative flake $6.50–$11/sq ft, polyaspartic $7–$15/sq ft, metallic $11–$17/sq ft. Ranges vary widely with floor condition, repairs and the system chosen.
| Project Type | Typical Size | Typical price range | What’s included |
|---|---|---|---|
| Single-Car Garage | 200 sq ft | $1,300 – $2,200 | Flake system, excluding moisture treatment and repairs |
| Double-Car Garage | 400 sq ft | $2,600 – $4,400 | Flake system, excluding moisture treatment and repairs |
| Basement | 600 sq ft | $3,900 – $6,600 | Flake system, excluding moisture treatment and repairs |
| Polyaspartic (1-Day Cure) | Any size | $7 – $15/sq ft | UV-stable, fast-cure topcoat |
| Commercial / Retail | 1,000+ sq ft | Quoted per project | Heavy-duty flake or quartz, slip-resistant |
| Metallic / Designer Epoxy | Any size | Quoted on site, typically higher than decorative flake | Premium metallic pigments, artistic finish |
| Repairs, moisture treatment, prep upgrades | — | Quoted on site | Priced after on-site assessment |
Questions to Ask Any Installer Before You Sign
A coated concrete floor succeeds or fails on preparation and moisture. These are the questions worth asking any contractor:
- What surface profile will you prepare to? Coating manufacturers specify a Concrete Surface Profile. The ICRI Technical Guideline 310.2R defines the CSP 1–10 scale.
- Will you test the slab for moisture vapor? ASTM F1869 (anhydrous calcium chloride) and ASTM F2170 (in-situ relative-humidity probes) are the two standard test methods.
- What moisture threshold are you applying? Many flooring manufacturers set the limit at 3 lb of moisture per 1,000 sq ft per 24 hours (the ASTM F1869 unit of measure).
- How many topcoats, and what type? UV-stable aliphatic polyurethane or polyaspartic topcoats resist yellowing better than a standard epoxy topcoat.
- Are crack repair, cove base and cleanup included or extra? These are commonly quoted separately.
- How long before the floor can take traffic? Cure time depends on the system and the temperature — ask for the figure for your specific coating.
What Affects the Price of Your Floor
- Floor area — larger pours lower the per-sq-ft rate.
- Concrete condition — cracks, spalling and previous coatings add prep time.
- Moisture — a slab above the manufacturer’s moisture limit needs a moisture vapor barrier before coating.
- System chosen — solid-colour is the base; flake, metallic and polyaspartic each add cost.
- Access and clearing — tight access or heavy furniture moving adds labour.
Get Your Exact Price
Prices depend on an on-site assessment.
You can also email info@epoxyflooringvan.com.
Every slab is different, and a firm price requires seeing the space.
- What typically happens: an installer measures the space, tests the slab for moisture, assesses cracks and discusses colour options before quoting the job.
- How to book: Call (778) 807-7627 or use the quote form.
Still researching? Use the typical-range calculator to plug in your square footage and get an instant planning range — no email required.
Last updated October 2026. Ranges are typical Greater Vancouver market prices, not a quote for your floor.